Article citationsMore>>

Hidalgo-Manrique, P., Yan, S., Lin, F., Hong, Q., Kinloch, I., Chen, X., Young, R., Zhang, X. and Dai, S. (2017) Microstructure and Mechanical Behaviour of Aluminium Matrix Composites Reinforced with Graphene Oxide and Carbon Nanotubes. Journal of Materials Science, 52, 13466-13477.
https://doi.org/10.1007/s10853-017-1450-6

has been cited by the following article:

• TITLE: On the Pre-Forging Heating Methods for AA2014 Alloy

  AUTHORS: Richard Turner, William Turner, Hao Wu

  KEYWORDS: Precipitate, Hardness, Microstructure, Heat Treatment

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.11 No.4, November 27, 2023

  ABSTRACT: The aluminium alloy AA2014 is one of the most widely used of the 2xxx series alloys, owing to its superior strength-to-weight ratio and stiffness. It is commonly forged to shape for use in aerospace parts. Three different small pilot-scale AA2014 billets were subjected to different heating operations, to physically simulate a pre-forge heating operation. The unheated sample and heated samples were then analysed for micro structural evolution and mechanical properties, to understand how the pre-forge heat treatments may vary the starting condition of the alloy before being forged. It was shown that an induction heating process has the greatest impact upon the precipitation distribution. Whilst this variation is commonly considered a negative impact, the opportunity to control the induction heating to promote preferential microstructure at specific locations within the billet may be possible.