TITLE:
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method
AUTHORS:
Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa
KEYWORDS:
Machining, Cutting Temperature, Modeling, Wear, Cutting Tool
JOURNAL NAME:
Modern Mechanical Engineering,
Vol.13 No.2,
May
31,
2023
ABSTRACT: Wear of cutting tools is a big concern for industrial manufacturers, because of their acquisition cost as well as the impact on the production lines when they are unavailable. Law of wear is very important in determining cutting tools lifespan, but most of the existing models don’t take into account the cutting temperature. In this work, the theoretical and experimental results of a dynamic study of metal machining against cutting temperature of a treated steel of grade S235JR with a high-speed steel tool are provided. This study is based on the analysis of two complementary approaches, an experimental approach with the measurement of the temperature and on the other hand, an approach using modeling. Based on unifactorial and multifactorial tests (speed of cut, feed, and depth of cut), this study allowed the highlighting of the influence of the cutting temperature on the machining time. To achieve this objective, two specific approaches have been selected. The first was to measure the temperature of the cutting tool and the second was to determine the wear law using Rayleigh-Ham dimensional analysis method. This study permitted the determination of a law that integrates the cutting temperature in the calculations of the lifespan of the tools during machining.