TITLE:
Co-liquefaction of Coal and Used Tire in Supercritical Water
AUTHORS:
Kwanruthai Onsri, Pattarapan Prasassarakich, Somkiat Ngamprasertsith
KEYWORDS:
Co-liquefaction, Coal, Used Tire, Supercritical Water
JOURNAL NAME:
Energy and Power Engineering,
Vol.2 No.2,
May
28,
2010
ABSTRACT: The co-liquefaction of lignite coal and used tire was performed in a 250-ml batch reactor, in supercritical water under a nitrogen atmosphere to investigate the effects of temperature (380-440℃), water/feedstock ratio (4/1-10/1 (wt./wt.)) and the % used tire content in the feedstock (0-100 wt.%) on the conversion efficiency, liquid yield and oil composition attained. The maximum conversion and oil yield were 67 and 50%, respectively, obtained at 400℃ at 1 min, with water/feedstock ratio of 10/1 and 80% used tire content. The distillation characteristics of the oil products, analyzed by simulated distillation gas chromatography, revealed that the oil composition depended significantly on the reaction temperature. The co-liquefaction of coal and used tire yielded a synergistically increased level of oil production. Moreover, the total conversion level obtained with co-liquefaction alone was almost equal to those obtained in the presence of either Fe2O3 or NiMo as catalysts, under the same conditions. Therefore, supercritical water is a good medium for the dissolution of the volatile matter from a coal and used tire matrix.