Article citationsMore>>

Mio, H., Kano, J., Saito, F. and Kaneko, K. (2004) Optimum Revolution and Rotational Directions and Their Speeds in Planetary Ball Milling. International Journal of Mineral Processing, 74, S85-S92.
https://doi.org/10.1016/j.minpro.2004.07.002

has been cited by the following article:

• TITLE: Effect of Milling Parameters on DEM Modeling of a Planetary Ball Mill

  AUTHORS: Mohsen Mhadhbi

  KEYWORDS: DEM Modeling, Milling Parameters, Planetary Ball Mill, Particles Shape

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.13 No.4, April 28, 2023

  ABSTRACT: The effects of the milling parameters involving shape of powder particles, rotation speed, and ball-to-powder diameter (BPDR) on DEM modeling in the planetary ball mill were investigated. BPDR was varied from 1 to 10. The results revealed that the size and shape of the powder particles do not give a significant change in simulation results when BPDR attainsmaximum value of 10. The increasing of BPDR leads to the increase of simulation time and size. Hence, the effect of change of the powder particle shape on the calculated data size is not significant. The results also revealed that the increasing rotation speed increases impact energy between powder particles.