TITLE:
Research on Distribution Regularities of Dust Concentration and Granularity in Large Mining Height Working Face
AUTHORS:
Daqing Li, Qingyi Tu, Yang Yang
KEYWORDS:
Safety Science and Engineering, Dust Concentration, Filter Membrane Method, Particle Size Distribution, Respirable Dust
JOURNAL NAME:
World Journal of Engineering and Technology,
Vol.11 No.2,
April
7,
2023
ABSTRACT: The key for dust control of coal mine is to clarify the dust concentration distribution and sedimentation in different areas. Both similarity experiment and numerical simulation method have certain restrictions and are quite different from the actual situation on site. In order to study the dust sedimentation regularity of coal mine in large mining height, “filter membrane method” is adopted in this paper,i.e., to dry and weigh the filter membrane before and after sampling, collect the dust of respirable zone on mining face and calculate the dust concentration based on a main airway of 100 m. The result shows that: A large amount of dust will be produced during coal mining, wherein the maximum dust concentration from 6 m upstream to 100 m downstream of coal cutter is 121 mg/m3, while the minimum dust concentration is 61 mg/m3; The dust concentration in return airway is reduced with the distance increases, while the dust concentration at the entrance is 91 mg/m3; A large amount of dust may fall from roof during section advancing and improves the dust concentration of hydraulic support in walking area obviously; The dust granularity of mining face and return airway is 0 - 100 μm, but the amount of respirable dust is higher than 80%, the larger the dust particle size, the higher the dust concentration. Besides, dust in small particle size can be suspended in air flow for longer, but that in large particle size may subside under the action of gravity; To reduce dust exposure, the mining position shall be located in the windward direction of advancing or coal cutter. This research can provide guidance for taking dust prevention measures of working face in large mining height.