TITLE:
Development of Sensible Heat Storage Materials Using Sand, Clay and Coal Bottom Ash
AUTHORS:
Boubou Bagre, Ibrahim Kolawole Muritala, Tizane Daho, Makinta Boukar, Yomi Woro Gounkaou, Babajide Epe Shari, Aissatou Ndiaye, Antoine Bere, Adamou Rabani
KEYWORDS:
Ceramic Ball, Sand, Clay, Coal Bottom Ash, Thermal Energy Storage Material, Thermocline, Concentrating Solar Power Plant
JOURNAL NAME:
Materials Sciences and Applications,
Vol.13 No.12,
December
29,
2022
ABSTRACT: In this paper, the mechanical and thermal properties of a sand-clay ceramic with additives coal bottom ash (CBA) waste from incinerator coal power plant are investigated to develop an alternative material for thermal energy storage (TES). Ceramic balls are developed at 1000°C and 1060°C using sintering or firing method. The obtained ceramics were compressed with a compression machine and thermally analyse using Decagon devise KD2 Pro thermal analyser. A muffle furnace was also used for thermal cycling at 610°C. It was found that the CBA increased the porosity, which resulted in the increase of the axial tensile strength reaching 3.5 MPa for sand-clay and ash ceramic. The ceramic balls with the required tensile strength for TES were selected. Their volumetric heat capacity, and thermal conductivity range respectively from 2.4075 MJ·m-3·°C-1 to 3.426 MJ·m-3·°C-1 and their thermal conductivity from 0.331 Wm-1·K-1, to 1.014 Wm-1·K-1 depending on sand origin, size and firing temperature. The selected formulas have good thermal stability because the most fragile specimens after 60 thermal cycles did not present any cracks. These properties allow envisioning the use of the ceramic balls developed as filler material for thermocline thermal energy storage (structured beds) in Concentrating Solar Power plants. And for other applications like solar cooker and solar dryer.