TITLE:
The Performance Study on Adsorption of SO2 of CuO Modifying 13X Zeolite Molecular Sieve
AUTHORS:
Dayi Qian, Yuebo Zheng, Peiliang Shi, Wei Su, Zhensong Tong, Baorui Liang, Yan Wang
KEYWORDS:
Air Pollution Control, Zeolite Molecular Sieve, Adsorbent, Flue Gas Purification, Sulfur Dioxide
JOURNAL NAME:
American Journal of Analytical Chemistry,
Vol.13 No.11,
November
22,
2022
ABSTRACT: Research and development of efficient, economical and resource-based flue gas desulfurization technology has always been a hot spot in the field of air pollution control. Molecular sieve materials have been paid attention to by SO2 adsorbent researchers due to their huge specific surface area. In this paper, 13X zeolite was modified with Cu(NO3) 2·3H2O to obtain 13x-Xwt %CuO (calculated by the amount of CuO loaded). The adsorption time and capacity of SO2 penetration sorbent and the isothermal curve of N2 adsorption-desorption were studied. The results are as follows: 13X-3wt%CuO has the best adsorption effect, the penetration adsorption time is 110 min, the penetration adsorption capacity is 43.41 mg·g-1, the saturation adsorption capacity is 49.27 mg·g-1; The amount of CuO loading has a great influence on the adsorption effect of modified 13X molecular sieve on SO2. SEM and BET characterization showed that CuO modification did not change the external morphology of 13X molecular sieve, changed the pore size, but did not block the original channel of the molecular sieve, before and after modification belong to the type I adsorption isothermal curve. The pore size distribution and type of molecular sieve, as well as the content and type of alkali metal cations jointly control the adsorption process of SO2 by 13X-xwt %CuO. XPS characterization showed that Cu(NO3) 2 decomposed into CuO and Cu2O during roasting at 450°C, CuO/Cu2O ≈ 1.5. The R2 values of the quasi-second-order kinetic models obtained from the 13X-Xwt %CuO particle diffusion kinetic models were all above 0.99, indicating that the quasi-second-order kinetic equations were more relevant. Particle diffusion dynamics model in fitting results show that the adsorption process can be divided into two stages, the first phase of surface adsorption and diffusion rate in the granules common control process, more accurate dynamics model of the secondary in the second phase particle diffusion rate control stage, mainly for the micropore adsorption or chemical adsorption, quasi level 2 dynamic model conformity of variation; C is a constant not equal to 0, indicating that the adsorption of SO2 is not completely through the form of intra-particle diffusion, and a small amount of chemisorption exists. And it is the compound effect of multiple adsorption mechanisms.