Article citationsMore>>

Amey, K.B., Ouro-Djobo, S.K. Neglo, Abalo, P., Sounsah, K.M., Amoussou, K. and Vianou, A. (2018) Study of Durability of Siliceous Sand Based on Mortars in Togo, and of Binder of Plastic Bags of the Kind “Voltic”: Hydrocarbons’ Effect. Journal of Minerals and Materials Characterization and Engineering, 6, 25-37.
https://doi.org/10.4236/jmmce.2018.61003

has been cited by the following article:

• TITLE: Identification of Glass Powders and Sands from the Crushing of Glass Waste from the City of Lomé in Togo

  AUTHORS: Apedjinou Dodji Kplolanyo, Samah Essoavama Ouro-Djobo, Amey Kossi Bollanigni, Gbafa Kodjovi Senanou

  KEYWORDS: Glass Waste, Granular Parameters, Weibull’s Law, Construction Materials

  JOURNAL NAME: Open Journal of Civil Engineering, Vol.12 No.3, September 30, 2022

  ABSTRACT: The sustainability of a city depends on the effective and efficient management of its solid waste. Waste recycling channels mainly process glass bottles for direct reuse. Some of these sectors carry out the crushing and grinding of end-of-life glass waste for use in civil engineering without the identification in terms of building materials being clearly established. The present study therefore aims to determine the physical and chemical characteristics of glass powders and sands resulting from the crushing and grinding of glass waste from Grand Lomé in Togo in order to consider their granular potential. Samples of sand and glass powder from the crushing and grinding of white, brown and green glass were subjected to characterization tests in the laboratory followed by analysis of the granular parameters and their modeling by Weibull’s law. The results show that the powder and the glass sand contain a high proportion of silica (SiO2) ranging from 69.11% to 70.18% and a low proportion of alumina (Al2O3) (less than 0.07) and iron (Fe2O3) (lower to 1.09). These three materials have tight and male graded grain sizes (Cu Cc omogeneous (k dab Mf 2.1) make these materials probable aggregates for plaster and coating mortars. Nevertheless, an in-depth study will be made to determine a suitable formula.