TITLE:
Temperature-Irradiance Matrix and Determination of Temperature Coefficients of a Monocrystalline PV Module
AUTHORS:
Bazkir Ozcan, Meric Seval
KEYWORDS:
Photovoltaic, Temperature Coefficient, Linearity, Energy Rating
JOURNAL NAME:
Open Journal of Energy Efficiency,
Vol.11 No.3,
September
21,
2022
ABSTRACT: Photovoltaic
(PV) modules performance testing and energy rating as described in IEC 61853-1
standard depend on electrical performance parameters (short-circuit current,
open-circuit voltage, maximum-power) of PV modules as a function of temperature
and irradiance. In this work, in order to precisely determine the effects of
temperature on the electrical parameters of a monocrystalline PV module, the
temperature controlled, xenon light based solar simulator system with
irradiance attenuating masks was used. This solar simulator, according to the
IEC 60904-9 standard in terms of spectral match, spatial non-uniformity and
temporal instability has A+A+A+ classes which are two times better than the
standard requirements for a solar simulator to be used in PV module
measurements. Moreover, the thermal chamber used in this work is a closed type
chamber with fast opening door for not allowing the distortion of temperature
uniformity over the surface of PV modules under test. Within about 2 m × 2 m area within 15°C to
75°C temperature interval, the
temperature uniformity obtained for this system is less than 1.0°C which is almost two times better than the IEC
60891 standard requirements (±2.0°C). The temperature and irradiance dependent measurements of the
electrical performance parameters of a mono-crystalline PV module at various
irradiance levels and the evaluation of its temperature coefficients [α (% °C-1), β (% °C-1) and δ (% °C-1)] were done by implementing the interpolation
method described in IEC 60891 standard.