Article citationsMore>>

Achiou, B., El Omari, H., Bennazha, J., Albizane, A., Daoudi, L., Saadi, L., Ouammou, M., Younssi, S.A., El Maadi, A. and Chehbouni, M. (2016) Physicochemical and Mineralogical Characterizations of Clays from Fez Region (Basin of Saiss, Morocco) in the Perspective of Industrial Use. Journal of Materials and Environnemental Science, 7, 1474-1484.

has been cited by the following article:

• TITLE: Physico-Chemical and Mineralogical Characterizations of Two Togolese Clays for Geopolymer Synthesis

  AUTHORS: Komla Mawoulikplim Anove, Sanonka Tchegueni, Koffi Agbegnigan Degbe, Koffi Fiaty, Moursalou Koriko, Patrick Drogui, Gado Tchangbedji

  KEYWORDS: Clay, Kaolinite, Physico-Chemical Characterization, Geopolymer

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, September 2, 2022

  ABSTRACT: Geopolymers are an alternative to Portland cement, well known for their contribution to greenhouse gas emissions. Finding materials that can validly replace Portland cement is a challenge. It is in this logic that this work was undertaken with the objective of characterizing two local clay resources of Togo as raw materials for geopolymers. The physico-chemical properties of these clays were determined by characterization using X-ray diffraction (XRD), Fourier transform infrared (FTIR), thermogravimetric (TGA) and elemental analysis (ICP-OES). The results show that these clays contain kaolinite and therefore can be used in the formulation of geopolymers. The characterized clays underwent heat treatments transforming the crystalline phases into more reactive amorphous phases and then were activated by an alkaline solution in order to formulate the geopolymer materials. These elaborated materials were analyzed by Fourier transform infrared to identify the types of bonds formed. The results of these analyses show that these two local clays are well suited to be used in synthesizing geopolymers. Our future work will focus on the constraints of consolidation as well as the mechanical properties of these geopolymer materials.