TITLE:
Formation of Gel-Like Shear-Induced Structure with Dosing of Dilute Surfactant Solution and Its Effect on Turbulent Channel Flow
AUTHORS:
Shumpei Hara, Kazuki Ishii, Yasuo Kawaguchi
KEYWORDS:
Turbulent Channel Flow, Viscoelastic Fluid, Gelation, Scalar Transfer, PIV/PLIF
JOURNAL NAME:
Open Journal of Fluid Dynamics,
Vol.12 No.3,
August
1,
2022
ABSTRACT: A shear-induced structure (SIS) is formed under appropriate concentration and shear conditions in a surfactant micellar solution. In this study, we performed experiments of surfactant solution dosing in a fully developed two-dimensional turbulent channel flow from a sintered metallic wire mesh plate attached to a side wall. We investigated the behavior of the solution under the elongation during its passing through the wire mesh and under the strong shear due to the channel flow. It was confirmed that the dosed solution containing a laser dye was visualized by a laser sheet, and the accumulated gel from the wire mesh formed a layer and developed with time. Consequently, on dosing the dilute surfactant solution from the wire mesh, a gel-like SIS layer was formed, which majorly covered the wire mesh plate. The gel-like SIS layer on the wire mesh plate acted as a sticky solid and restricted the flow in the channel. This layer continued to grow while dosing, owing to which the pressure drop of the channel flow significantly increased. The gel-like SIS layer grew rapidly even in the turbulent flow and reached the equilibrium thickness. After the termination of the dosing, the gel layer collapsed gradually. In addition, the thickness of the gel-like SIS layer (indicating the strength indirectly) strongly depended on the surfactant concentration and the elongation rate in the wire mesh.