TITLE:
Modelling the Influence of Air Jet Configurations on Non-Woven Steel Fibre Mixing in the Melt Overflow Process
AUTHORS:
Ismail Abubakar, Hugh Gong, Sathish K. Nammi, Lee Marston, James Deane
KEYWORDS:
Non-Woven Steel Fibre, Steel Fibre Casting, Melt and Overflow, Pneumatic Conveying, Multi-Physics Simulation
JOURNAL NAME:
Modeling and Numerical Simulation of Material Science,
Vol.12 No.2,
April
22,
2022
ABSTRACT: The
mixing of non-woven steel fibres in melt overflow process for use in automotive
muffler systems was simulated. The aim was to identify optimum parameters for achieving a
good fibre mix. Numerical models of mixing chambers of melt overflow process
were developed. Multiphysics analyses involving heat transfer, fluid flow and
particle tracking were carried out using COMSOL code. The influence of air jet
configurations on the fibre distribution was studied. The fibres settled on the moving bed
within the mixing chamber were examined for their uniformity. The effect of
additional air jets to the existing chamber in a range of regions was explored.
An optimum configuration was identified by analyzing the compactness of the
particle clusters deposited in the simulation and validated using pixel data
acquired from real time imaging. The results showed that by employing dual air
jets at the front end of the chamber, the density of the fibre material has
improved. We conclude that through multi-physics modelling, it was possible to identify the
optimum air-jet configurations leading to fibre uniformity and its distribution.
This work also paves the way for incorporating a vision system to evaluate
fibre density in real time.