Article citationsMore>>

Wang, J., Jivkov, A.P., Li, Q.M. and Engelberg, D.L. (2020) Experimental and Numerical Investigation of Mortar and ITZ Parameters in Meso-Scale Models of Concrete. Theoretical and Applied Fracture Mechanics, 109, Article No. 102722. https://doi.org/10.1016/j.tafmec.2020.102722

has been cited by the following article:

• TITLE: Mesoscale Modeling of Hooked-End Steel Fiber Reinforced Concrete under Uniaxial Compression Using Cohesive Elements

  AUTHORS: Junjie Feng, Guansheng Yin, Zhu Liu, Jianhong Liang, Yunjie Zhang, Congge Wen

  KEYWORDS: Fiber Reinforced Concrete, Uniaxial Compression, Cohesive Zone Model, Failure Mode, Stress-Strain Curve

  JOURNAL NAME: Journal of Applied Mathematics and Physics, Vol.9 No.11, November 23, 2021

  ABSTRACT: Based on the cohesive zone model, the 2D mesostructures were developed for numerical studies of multi-phase hooked-end steel fiber reinforced concrete under uniaxial compression. The zero-thickness cohesive interface elements were inserted within the mortar, on interfaces of mortar and aggregates and interfaces of mortar and fibers to simulate the failure process of fiber reinforced concrete. The results showed that the numerical results matched well the experimental results in both failure modes and stress-strain behavior. Hooked-end steel fiber reinforced concrete exhibited ductile failure and maintained integrity during a whole failure process. Compared with normal concrete, HES fiber reinforced concrete was greater stiffness and compressive strength; the descending branch of the stress-strain curve was significantly flatter; the residual stress was higher.