TITLE:
Mechanical Design of Long-Term Body-Adhered Medical Devices to Maximize On-Body Survival
AUTHORS:
Brian Ferry, John Abraham
KEYWORDS:
Finite Element Analysis, Explicit Dynamics, Numerical Simulation, Comparative Analysis, Medical Device, Body-Worn Device, Mechanical Design
JOURNAL NAME:
Journal of Biomedical Science and Engineering,
Vol.14 No.9,
September
30,
2021
ABSTRACT: Long-term, body-adhered medical devices rely on an adhesive interface to maintain contact with the patient. The greatest threat to on-body adhesion is mechanical stress imparted on the medical device. Several factors contribute to the ability of the device to withstand such stresses, such as the mechanical design, shape, and size of the device. This analysis investigates the impact that design changes to the device have on the stress and strain experienced by the system when acted on by a stressor. The analysis also identifies the design changes that are most effective at reducing the stress and strain. An explicit dynamic finite element analysis method was used to simulate several design iterations and a regression analysis was performed to quantify the relationship between design and resultant stress and strain. The shape, height, size, and taper of the medical device were modified, and the results indicate that, to reduce stress and strain in the system, the device should resemble a square in shape, be short in height, and small in size with a large taper. The square shape experienced 17.5% less stress compared to the next best performing shape. A 10% reduction in device height resulted in a 21% reduction in stress and 24% reduction in strain. A 20% reduction in device size caused a 7% reduction in stress and 2% reduction in strain. A 20% increase in device taper size led to a negligible reduction in stress and a 6% reduction in strain. The height of the device had the greatest impact on the resultant stress and strain.