TITLE:
Experiment and Large-Eddy Simulation on Free Air Jets Issuing from a Rectangular Nozzle with Deflectors
AUTHORS:
Riku Ouchi, Takahiro Kiwata, Naoki Kajitani, Hiroshi Teramoto
KEYWORDS:
Jet, Rectangular Nozzle, Deflectors, Flow Control, Flow Measurement, Numerical Simulation, LES
JOURNAL NAME:
Journal of Flow Control, Measurement & Visualization,
Vol.9 No.4,
October
25,
2021
ABSTRACT: The purpose of the present study was to establish a passive flow control method for a rectangular jet using two types of deflectors installed symmetrically inside a nozzle. This deflector in a rectangular nozzle generates the rectangular coaxial jets. The effect of the slant angle of the deflectors on the flow characteristics and the spread of the rectangular jet was investigated experimentally and by large-eddy simulation. The experiment and the numerical simulation were carried out at a Reynolds number of 9000. The rectangular jet with no deflectors generates a vortex ring from the nozzle exit. The vortex ring collapses in the downstream region and the outline of the jet changes from rectangular to diamond-shaped as a result of the axis-switching phenomenon. The rectangular jet with divergent and convergent deflectors shows particularly noticeable changes in the flow characteristics and vortical structures, as compared to the case with no deflectors. In the case of the rectangular jet with divergent deflectors (slant angle of α= 6°), minor axis spread is promoted more than major axis spread, and axis switching occurs closer to the nozzle exit than that in the case of no deflectors. The outline of the jet also changes from lateral rectangular to vertical rectangular as a result of axis switching. On the other hand, in the case of a rectangular jet with convergent deflectors (α= -6°), minor axis spread is suppressed more than major axis spread, and axis switching occurs farther from the nozzle exit than that in the case with no deflectors. The outline of the jet does not change until the downstream region. Therefore, the spread and the axis-switching location for the rectangular jet can be controlled by the deflectors inside the rectangular nozzle.