Article citationsMore>>

Wittstadt, U., Füldner, G., Laurenz, E., Warlo, A., Große, A., Herrmann, R., Schnabel, L. and Mittelbach, W. (2017) A Novel Adsorption Module with Fiber Heat Exchangers: Performance Nalysis Based on Driving Temperature Differences. Renew Energy, 110, 154-161.
https://doi.org/10.1016/j.renene.2016.08.061

has been cited by the following article:

• TITLE: Study of Habitat’s Thermal Performance Equipped with an Adsorption Cooling Unit by Geothermal Heat Pump

  AUTHORS: Djanfar El-Maktoume, Xavier Chesneau, Abdoulaye Diallo, Zely Arivelo Randriamanantany

  KEYWORDS: Cooling, Habitat, Adsorption, Geothermal, Optimization

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.9 No.8, August 19, 2021

  ABSTRACT: This work concerns a modeling of habitat equipped with an adsorption cooling unit powered by a geothermal heat pump in the context of the climate of the Comoros Islands. Cooling unit is a simple system consisting of an adsorber, condenser and evaporator. The modeling of the habitat-air conditioning system was based on a description of heat and mass transfers. The first law of thermodynamics on the energy conservation using the analogies between heat and electrical transfers is used to establish the equations of the model. Zeolite-methanol pair and Dubinin-Astakhov adsorption model are used to describe the amount of adsorbed mass. The finite difference method applied to a point of the considered exchange surface is used to discretize equations and resolve them. The coupling of the system takes place through a convective transfer between the air inside habitat and the evaporator’s surface. This article presents results for typical November days in Comoros. Different temperatures of habitat with and without a cooling unit show that using the adsorption cooling unit can help lower internal temperatures. We observe a temperature difference of 2.14 K in particular at 2 p.m., if the air conditioning starts at 8 a.m. The influence of the input parameters on the air inside the habitat makes it possible to assess the impact on indoor comfort. The COPth can reach 0.46. However, we can get a high performance if we optimize temperature thresholds. These show that this type of cooling unit can help improve the habitat thermal comfort in a tropical and dry climate.