TITLE:
A Comparison of Optical Properties of CuO and Cu2O Thin Films for Solar Cell Applications
AUTHORS:
Radu Bunea, Ashwin Kumar Saikumar, Kalpathy Sundaram
KEYWORDS:
Cu2O Thin Film, Cuo Thin Film, Optical Properties, Bandgap, Photoluminescence
JOURNAL NAME:
Materials Sciences and Applications,
Vol.12 No.7,
July
2,
2021
ABSTRACT: Solar energy is becoming more popular and widespread, and consequently, the materials to manufacture solar cells are becoming more limited and costly. Therefore, in order to keep solar energy affordable and available, we must research alternative materials such as copper oxides. Some benefits of copper oxides include being available in abundance, affordable, low toxicity, low bandgap, and a high absorption coefficient—all of which contribute to it being a valuable interest for the manufacturing of solar cells. In this study, CuO thin films were synthesized utilizing RF sputtering technique with deposition occurring at room temperature followed by thermal annealing between 100°C and 400°C and using different gases, oxygen (O2) (oxidizing and reactive gas) and nitrogen (N2) (inert gas), besides air. Afterwards, these thin films were evaluated for a range of wavelengths: 200 - 400 nm (UV spectrum), 400 - 700 nm (Visible spectrum), and 700 - 800 nm (IR spectrum), for both, optical transmittance and photoluminescence. In addition, the CuO results were compared to our Cu2O results from a previous study to assess their differences. In the results of this study, the CuO thin film initially had a bandgap of 2.19 eV at room temperature, and by increasing the annealing temperature to different levels, the bandgap decreased respectively. The presence of air in the chamber allowed for the highest decrease, followed by the nitrogen (N2) and the lowest decrease was observed in the presence of oxygen (O2). This was reflected in the decrease in the bandgap values from 2.19 eV (room temperature) to 2.05 eV for the films annealed at 400°C.