TITLE:
Analysis of Pollution and Blockage of Titanium Rod Sintered Microporous Filter Element
AUTHORS:
Ronglei Xiong, Peng Liu, Yaoyuan Zhang, Yuan Nan, Jinding Chen, Xiaojuan Chen, Shuangzheng Ma, Guanqiao Lin, Qun Zhang
KEYWORDS:
Microfiltration, Titanium Rod Sintered Filter Element, Membrane Pollution, Cleaning
JOURNAL NAME:
Open Journal of Applied Sciences,
Vol.11 No.5,
May
28,
2021
ABSTRACT: Microfiltration is widely used in fine filtration operations, with dead-end filtration and cross-flow filtration. The microfiltration filter element or the microfiltration membrane is easy to be polluted by impurities in the water and causes fouling, resulting in flux attenuation. The flux can be expressed by Darcy’s law and attenuation model. In this paper, two industrial titanium rod sintered filter elements (?60 × 960 mm and ?60 × 960 mm) of different specifications are selected, and tap water (1.0 NTU) is used for constant pressure dead-end filtration. The amount tends to be the same, about 0.435 m3·m?2·h?1, which has nothing to do with the filtration accuracy of the filter element but only depends on the characteristics of the filter cake and the filter membrane. Through the analysis of the two models, it is found that the two filtration flux models are not universal and difficult to be applied in engineering.