Article citationsMore>>
Tian, Z., Ren, X., Lei, Y., Zheng, L., Geng, W., Zhang, J. and Wang, J. (2019) Corrosion of RE2Si2O7 (RE = Y, Yb, and Lu) Environmental Barrier Coating Materials by Molten Calcium-Magnesium-Alumino-Silicate Glass at High Temperatures. J. EUR. CERAM. SOC., 39, 4245-4254. https://doi.org/10.1016/j.jeurceramsoc.2019.05.036
has been cited by the following article:
-
TITLE:
Oxidation Performance of Ytterbium Disilicate/Silicon Environmental Barrier Coating via Optimized Air Plasma Spraying
AUTHORS:
Yingjie Jian, Yanfei Wang, Rongjun Liu, Fan Wan
KEYWORDS:
Environmental Barrier Coating, Air Plasma Spraying, Ytterbium Disilicate, SiCf/SiC Composites
JOURNAL NAME:
Journal of Materials Science and Chemical Engineering,
Vol.9 No.4,
April
13,
2021
ABSTRACT: Environmental barrier coatings (EBCs) play a critical role in mitigating the degradation of SiCf/SiC ceramic matrix composites (CMCs) in complex combustion environment, and improve the service life of thermal engine components. In this paper, by adjusting the parameters of atmospheric plasma spraying (APS), the spraying process of ytterbium disilicate (Yb2Si2O7) under a lower power has been optimized. A two-layer EBC system consisting of ytterbium disilicate and silicon is prepared on the SiCf/SiC composite substrate by using optimized technological parameters. The thermal resistance and water oxygen corrosion resistance of such two-layer EBC system are investigated. The results indicate that the current ytterbium disilicate/silicon EBC system exhibits good phase stability, excellent water vapor and oxygen corrosion resistance. However, the exposed silicon bonding layer tends to generate an excessive thermal growth oxide (TGO) layer known as SiO2, leading to an early spallation of the coating.