Article citationsMore>>

Abd Halip, J., Lee Seng, H., Zaidon, A., Md Tahir, P., Lum Wei, C. and Mohd Khairun, A.U. (2019) Effect of Treatment on Water Absorption Behavior of Natural fiber-Reinforced Polymer Composites. In: Jawaid, M., Thariq, M. and Saba, N., Eds., Mechanical and Physical Testing of Biocomposites, fibre-Reinforced Composites and Hybrid Composites, Elsevier Ltd., Amsterdam, 141-156.
https://doi.org/10.1016/B978-0-08-102292-4.00008-4

has been cited by the following article:

• TITLE: Implementation and Evaluation of Certain Properties of a Polymer Matrix Composite Material Reinforced by Fibrous Residues of Saccharum officinarum in View of an Applicability Orientation

  AUTHORS: Marie Josette Ndengue, Merlin Zacharie Ayissi, Pierre Marcel Anicet Noah, Fabien Betene Ebanda, Atangana Ateba

  KEYWORDS: Composite, Polymer, Bagasse, Young Modulus, Saccharum officinarum

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, March 26, 2021

  ABSTRACT: This study examines the implementation and characterization of a polymer matrix composite material reinforced by sugarcane residues. The aim of the study is to enhance the abundantly produced sugarcane bagasse in the form of residues in the processing plants of said sugar cane. The composite material developed takes into account the size parameters and mass load rate of the reinforcement, the variations of which are between 2.5 mm and 4 mm respectively for the first parameter and 10% to 25% for the second. The load on the test tube during the test has a random orientation. The composite is polyester matrix. The cold compression moulding technique was used in the production of the various samples. Physical properties such as the rate of water absorption and the density of the composite are assessed. The three-point bending tests are carried out with the aim of inducing Young’s modulus from the elaborate samples. Analysis of physical properties shows that water absorption increases with the rate of residue load. The average water absorption rate of bagasse fibres is estimated at 8% for the 2.5 mm fiber size and 12% for the 4 mm fiber size for all composites. Mechanical characterization by bending tests reveals a fragile behavior of the samples tested. Young’s modulus decreases when the load rate of fibrous residues increases regardless of the size of the fibers.