TITLE:
Water Resources Management and Wastewater Treatment in the Democratic Republic of Congo (D.R.C): Application of Galvanic Treatment, Results and Prospectives
AUTHORS:
Arthur Kaniki Tshamala, Mathieu Kayembe Musala, Gigi Kasongo Kalenga
KEYWORDS:
Water Resources, Wastewater, Management, Galvanic Treatment
JOURNAL NAME:
Journal of Water Resource and Protection,
Vol.13 No.3,
March
10,
2021
ABSTRACT: The rapid industrial development and population growth increase the utilization of fresh water resulting in an increase of the amount of wastewater. Several Countries face a double challenge with regard to water resources, namely meeting the growing need for water for the population and treating the wastewater generated for application. The toxicity found in these water streams threatens the environment and human health. Hence the urgent need is to treat wastewater. The DRC is not immune from this threat. Its average population growth rate has exceeded the 3% and the number of industries it hosts continues to increase. The wastewater generated by this increasing pressure from urbanization and industrialization must be treated as required in the Congolese legal arsenal. Various factors need to be considered prior choosing the water treatment method. The choice must take into account the imperatives of the moment which are: modernization (local context) and sustainable development (international context). There are several wastewater treatments that are widely used for the removal of toxic elements such as ion exchange, reverse osmosis, chemical precipitation and electro-coagulation just to name a few. The most recent studies have shown that the galvanic technique can be used in the purification of water from domestic and industrial origin to meet drinking water standards. Various researchers have used this technique at laboratory and pilot scale demonstrating its cost-effectiveness as it uses no chemical reagents, consumes less energy and occupies only a small space for processing large flows. However, there are very few studies demonstrating the success of this treatment on an industrial scale. Therefore, this work seeks to understand and master the mechanisms that take place in the galvanic treatment. In addition, this study focuses on the development of a robust prototype that is adaptable to the needs of various users while at the same time being relatively cheap to meet the national needs.