Article citationsMore>>

Chen, D., Sixta, M.E., Zhang, X.F., De Jounghe, L.C. and Ritchie, R.O. (2000) Role of the Grain-Boundary Phase on the Elevated-Temperature Strength, Toughness, Fatigue and Creep Resistance of Silicon Carbide Sintered with Al, B and C. Acta Materialia, 48, 4599.
https://doi.org/10.1016/S1359-6454(00)00246-9

has been cited by the following article:

• TITLE: Chemical Heat Storage Using an SiC Honeycomb Packed with CaCl2 Powder

  AUTHORS: Atsuhiro Ichinose, Kazuki Kuwata, Takehiro Esaki, Takayuki Matsuda, Noriyuki Kobayashi

  KEYWORDS: Chemical Heat Storage, CaCl2, Heat Discharging, Simulation

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.8 No.11, November 17, 2020

  ABSTRACT: Chemical heat storage is a promising technology for improving thermal energy efficiency. In this study, CaCl2 and H2O were selected as a reaction system for utilization of low-grade exhaust heat that is cooler than 200°C. Heat discharging and charging were conducted through the CaCl2 hydration reaction. A silicon carbide honeycomb was adopted to improve heat transfer in the CaCl2 packed bed. The heat storage, condenser, and evaporator temperature were set at 150°C, 30°C and 90°C respectively. Repeated trials and experiments are time consuming for optimizing design of the equipment. Therefore, in this research, we constructed a simulation that can predict the performance of the device. A numerical simulation model was utilized in preparation for the design of the heat storage module. The consistency of both the simulation and the experimental results was confirmed by comparing them.