Article citationsMore>>

LaDelpha, A.D.P., Neubing, H. and Bishop, D.P. (2009) Metallurgical Assessment of An emerging Al-Zn-Mg-Cu P/M Alloy. Materials Science Engineering: A, 520, 105-113.
https://doi.org/10.1016/j.msea.2009.05.039

has been cited by the following article:

• TITLE: Electrochemical Behavior of Alumix 321 PM and AA6061 Alloys in 3.5 wt% NaCl Solution by Electrochemical Impedance Spectroscopy Measurements

  AUTHORS: Natacha Rostomov, William Judge, George Jarjoura

  KEYWORDS: Aluminum, Powder Metallurgy, Aluminum Alloys, Corrosion, Electrochemical Impedance Spectroscopy, AA6061, Alumix 321

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.8 No.10, October 29, 2020

  ABSTRACT: Powder metallurgy (PM) is a very interesting metal manufacturing technique in the production of automotive components of a net or near net shape. In this research, the electrochemical corrosion behavior of a commercially available aluminum powder alloy known as Alumix 321 was investigated and compared to wrought alloy AA6061 in 3.5 wt% NaCl solution using Electrochemical Impedance Spectroscopy Measurements (EIS). Alumix 321 alloy samples were prepared by pressing the powder at pressures ranging from 50 to 500 MPa and subsequently sintering them for 30 min at 630°C. It was found that the presence of pores and their morphology strongly affect the corrosion behavior the PM samples.