TITLE:
Conductivity Method as a New Monitoring Technique for Corrosion and Corrosion Inhibition Processes of Zinc Metal
AUTHORS:
Abdelmnim M. Altwaiq, Sa’ib J. Khouri, Rami A. Abdel-Rahem, Ahmad K. Alkhawaldeh
KEYWORDS:
Conductivity, Monitoring Technique, Corrosion, Corrosion Inhibitor, Lignosulfonate
JOURNAL NAME:
American Journal of Analytical Chemistry,
Vol.11 No.10,
October
29,
2020
ABSTRACT: The electrical conductivity method was successfully applied as a new monitoring technique to monitor the corrosion and corrosion inhibition processes of zinc metal. Measurements of electrical conductivity at 20.0°C of three different corrosive solutions (HCl, NaOH, and NaCl) were performed with two different concentrations (0.10 and 1.00 M) containing zinc sheets in the absence and presence of four different concentrations of sodium lignosulfonate (1.0, 5.0, 10.0, and 20.0 mM). The analysis of curves that illustrates the changes in electrical conductivity of these solutions provides qualitative information about the strength of corrosion as well as the extent of corrosion inhibition behavior. The results obtained from electrical conductivity measurements revealed that sodium lignosulfonate was an effective corrosion inhibitor in acidic medium (for both 0.10 and 1.00 M HCl) in which it converted into lignosulfonic acid, but was less effective in salt and alkaline media.