Article citationsMore>>

Zherebtsov, S., Urzinova, M.M. and Salishchev, G. (2011) Spheroidization of the Lamellar Microstructure in Ti-6Al-4V Alloy during Warm Deformation and Annealing. Acta Materialia, 59, 4128-4150.
https://doi.org/10.1016/j.actamat.2011.03.037

has been cited by the following article:

• TITLE: Effect of Initial Microstructure on Phase Precipitation and Mechanical Properties during Heat Treatment of TC21 Titanium Alloy

  AUTHORS: Liuru Wang, Xiangqian Song, Yue Zhang, Lian Zhou

  KEYWORDS: TC21 Titanium Alloy, Fine Microstructure, Mechanical Properties, Phase Precipitation

  JOURNAL NAME: Engineering, Vol.12 No.10, October 28, 2020

  ABSTRACT: Phase precipitation and mechanical properties of TC21 titanium alloy with two different initial microstructures during heat treatment were determined. Result indicated that compared with coarse microstructure alloy, fine microstructure alloy developed finer microstructure, more unstable ω and α2 precipitates with much smaller size and lower volume fraction, and obtained better mechanical properties during heat treatment.