Article citationsMore>>

Zhang, J.F., Li, B., Huang, W.J., et al. (2009) Experimental Performance Comparison of Shell-Side Heat Transfer for Shell-and-Tube Heat Exchangers with Middle-Overlapped Helical Baffles and Segmental Baffles. Chemical Engineering Science, 64, 1643-1653.
https://doi.org/10.1016/j.ces.2008.12.018

has been cited by the following article:

• TITLE: Investigation of Shell and Tube Heat Exchanger with Disc-and-Doughnut Baffles

  AUTHORS: Kuerbanjiang Wusiman, Zhaolun Zhou

  KEYWORDS: Shell Tube Heat Exchanger, Disc-and-Doughnut Baffles, Heat Transfer Coefficient

  JOURNAL NAME: Open Access Library Journal, Vol.7 No.9, September 10, 2020

  ABSTRACT: Disk and doughnut baffles configuration for shell tube heat exchangers (STHXs) is one of the solutions for compensating the higher pressure drop penalty induced by conventional segmental baffles. Furthermore, absently reliable references for the optimum design of this type of STHXs are our main purpose to carry out this investigation. From modeling numerical simulation results, with 7 baffles and 70% baffles ratio geometrical dimension is suggested the optimum configuration of this type of heat exchange. Additionally, the characteristic of heat transfer performance is discussed by varying the flow velocity in all different flow regimes of shell and tube side respectively through conducting the experimental apparatus. Hopefully this result could provide validating information in optimum design of STHXs with disk and doughnut baffles.