Article citationsMore>>

El-Abbassi, F.E., Assarar, M., Ayad, R., Bourmaud, A. and Baley, C. (2020) A Review on Alfa Fibre (Stipa tenacissima L.): From the Plant Architecture to the Reinforcement of Polymer Composites. Composites Part A: Applied Science and Manufacturing, 128, Article ID: 105677.
https://doi.org/10.1016/j.compositesa.2019.105677

has been cited by the following article:

• TITLE: Physico-Chemical and Thermal Characterization of a Lignocellulosic Fiber, Extracted from the Bast of Cola lepidota Stem

  AUTHORS: Ndoumou Belinga Rémy Legrand, Meva’a Lucien, Ouagne Pierre, Betene Ebanda Fabien, Noah Pierre Marcel, Atangana Ateba Jean

  KEYWORDS: Cola lepidota Fiber, Thermal Stability, Physico-Chemical Characteristics, FTIR-ATR, Liber, Stem

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, August 19, 2020

  ABSTRACT: In this research work, fiber extracted from the bark of Cola lepidota (CL) plant, grown in the flora of Southern part of Cameroon, was investigated for composites reinforcement. The investigation was carried via evaluation of water absorption capacity, moisture content, real density, porosity, chemical composition, chemical structure and thermal behaviour. It was discovered that the new fiber has relatively low moisture content and water absorption capacity similar to those of other investigated natural fibers such as flax, sisal, coconut, hemp and jute. Its porosity was found appropriate for composite production and the fiber was found to be thermally stable up to 230°C, with maximum degradation temperature of 325°C. The main constituents of the fibre include cellulose, hemicellulose and lignin. In conclusion, based on the properties investigated, this fiber is considered suitable for composite manufacture.