TITLE:
Pilot Test of the Permeable Reactive Barrier for Removing Uranium from the Flooded Gunnar Pit
AUTHORS:
Dexu Kong, Lesley McGilp, Alexey Klyashtorin, Ian Wilson, Lee D. Wilson
KEYWORDS:
Adsorption, Breakthrough, Iron Oxide Coated Sand, Permeable Reactive Barrier, Uranium Species
JOURNAL NAME:
Journal of Geoscience and Environment Protection,
Vol.8 No.7,
July
29,
2020
ABSTRACT: This work reports on applying iron oxide coated sand (IOCS) media in an experimental permeable reactive barrier to remove uranium (U) species from uranium containing water. A field study was conducted at the legacy Gunnar uranium mine & mill site that was abandoned in the 1960s with limited to no decommissioning. The flooded Gunnar mine pit presently contains about 3.2 million m3 of water contaminated by dissolved U (1.2 mg/L), Ra-226 (0.4 Bq/L), and minor concentrations of other contaminants (As, Se, etc.). The water is seeping over the pit rim into Lake Athabasca, posing potential environmental and health concerns. IOCS media can be used to immobilize uranium species through an adsorption process. Herein, the preparation of hydrous ferric oxide sorbents and their supported forms onto silica sands is described. Fourier transform infrared spectroscopy (FTIR) and powder X-ray diffraction (pXRD) were used for structural characterization. The adsorption properties of the IOCS sorbent media were modeled by the Langmuir adsorption isotherm, where a maximum uranium uptake capacity was estimated. Bench-scale adsorption kinetic experiments were also performed before moving to a field trial. Based on these lab results and input on field-scale parameters, a pilot permeable reactive barrier was fabricated and a field test conducted near the Gunnar pit in June 2019. This pilot test provided technical data and information needed for designing a full-scale permeable barrier that employs the IOCS media. This approach can be applied for in-situ water treatment at Gunnar and other legacy uranium sites.