TITLE:
Optimal Thermal Insulation Thickness in Isolated Air-Conditioned Buildings and Economic Analysis
AUTHORS:
Mousa M. Mohamed
KEYWORDS:
Building Heat Load, Cooling Load Temperature Difference, Energy Saving, Power Consumption, Annual Cooling Degree-Day, Optimal Thermal Insulation Thickness, Payback Period
JOURNAL NAME:
Journal of Electronics Cooling and Thermal Control,
Vol.9 No.2,
June
19,
2020
ABSTRACT: The removal building heat load and electrical power consumption by air conditioning system are proportional to the outside conditions and solar radiation intensity. Building construction materials has substantial effects on the transmission heat through outer walls, ceiling and glazing windows. Good thermal isolation for buildings is important to reduce the transmitted heat and consumed power. The buildings models are constructed from common materials with 0 - 16 cm of thermal insulation thickness in the outer walls and ceilings, and double-layers glazing windows. The building heat loads were calculated for two types of walls and ceiling with and without thermal insulation. The cooling load temperature difference method, CLTD, was used to estimate the building heat load during a 24-hour each day throughout spring, summer, autumn and winter seasons. The annual cooling degree-day, CDD was used to estimate the optimal thermal insulation thickness and payback period with including the solar radiation effect on the outer walls surfaces. The average saved energy percentage in summer, spring, autumn and winter are 35.5%, 32.8%, 33.2% and 30.7% respectively, and average yearly saved energy is about of 33.5%. The optimal thermal insulation thickness was obtained between 7 - 12 cm and payback period of 20 - 30 month for some Egyptian Cities according to the Latitude and annual degree-days.