TITLE:
Application of 3D Reservoir Geological Model on Es1 Formation, Block Nv32, Shenvsi Oilfield, China
AUTHORS:
Ayman Al Rassas, Shaoran Ren, Renyuan Sun, Atif Zafar, Safea Moharam, Zhenliang Guan, Alalimi Ahmed, Mohammed Alomaisi
KEYWORDS:
3D Reservoir Geological Model, Es1 Formation, Block Nv32, Structural Model, Petrophysical Model
JOURNAL NAME:
Open Journal of Yangtze Oil and Gas,
Vol.5 No.2,
April
6,
2020
ABSTRACT: Three-dimensional geological modeling of reservoirs is an essential tool to predict reservoir performance and improve the understanding of reservoir uniqueness in Es1 formation. The paper focuses on the use of petrel software to build three-dimensional reservoir geological model which characterizes and assesses block Nv32 that located in the west of the Shenvsi oilfield in the south of Cangzhou city, Hebei province of China, and has an oil-bearing area of 1.4 km2. This study is depending on integration data from well logs of 22 wells which provided from geology, geophysics, and petrophysics to identify and provide precise depict of the subsurface internal structure and the reservoir heterogeneity. Input data was used to build the structural model, sedimentary facies model, petrophysical properties (porosity, permeability, saturation, and N/G model, and finally to determine the reservoir volume. The lithological facies were simulated using the assigned value method. Moreover, Petrophysical properties (Porosity, permeability, oil saturation and net to gross) were constructed for each zone using the Sequential Gaussian Simulation method to guide the distribution of petrophysical properties of Es1 formation, block Nv32. Statistical analysis of the porosity, permeability, oil saturation and N/G model present that the porosity occurrence distribution is mainly concern between 0.2% - 36.39% of block Nv32 with an average porosity value of 17.5%, permeability between 0.017 mD to 974.8 mD, having an average permeability of 59.44 mD, oil saturation between 0.00 to 0.95 having an average value of 0.22, and N/G is mainly concentrated between 0.01 to 1.00 within an average value of 0.61. This research has indicated the reliability of the three-dimensional model technique as a suitable tool to provide a sufficient understanding of petrophysical distribution. The south-western and north-western indicate that oilfield is very promising an exploratory well should be drilled to find out the thickness and size of the reservoir.