Article citationsMore>>

Fleisher, A., Zolotaryov, A., Kovalevsky, G., Muller-Kamskii, E., Eshed, M. and Kazakin, V.V. (2019) Reaction Bonding of Silicon Carbides by Binder Jet 3D-Printing, Phenolic Resin Binder Impregnation and Capillary Liquid Silicon Infiltration. Ceramics International, 45, 18023-18029.
https://doi.org/10.1016/j.ceramint.2019.06.021

has been cited by the following article:

• TITLE: Joining of SiC Ceramics by the Flash-Bonding Technique

  AUTHORS: Takuro Yoshitake, Yoshio Ohta, Mikito Kitayama

  KEYWORDS: Silicon Carbide, Joining, Flash-Bonding, Borosilicate Glass

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.8 No.3, March 13, 2020

  ABSTRACT: Because Silicon carbide (SiC) ceramics have various excellent properties, the demand for larger and complicated shapes has been increasing. This paper introduces an innovative method that would not require a large furnace, and further, would minimize the production cost and the thermal history, namely the “flash-bonding” technique. The borosilicate glass with low thermal expansion coefficient, Pyrex glass, was selected as the brazing material. In this work, as-is or surface-oxidized SiC plates were joined using Pyrex glass as brazing material, and the reaction and wetting of Pyrex glass on as-is or surface-oxidized SiC plate were investigated. It was found that the protective film of the surface-oxidized SiC lowered the oxygen partial pressure, and hence, generated many pores in the interface.