Article citationsMore>>

Oh, C.-W., Byun, Y.-S., Oh, J.-K., Kim, J.-J., Jeon, I.-H., Lee, J.-H. and Park, K.-H. (2012) Plating of Humeral Shaft Fractures: Comparison of Standard Conventional Plating versus Minimally Invasive Plating. Orthopaedics & Traumatology: Surgery & Research, 98, 54-60.
https://doi.org/10.1016/j.otsr.2011.09.016

has been cited by the following article:

• TITLE: Humerus Nailing in Lateral Position (Operative Technique)

  AUTHORS: Wasudeo Gadegone, Piyush Gadegone, Vijayanand Lokhande

  KEYWORDS: Humerus Fracture, Interlock Nailing, Lateral Position, Antegrade Nailing

  JOURNAL NAME: Open Journal of Orthopedics, Vol.10 No.2, February 5, 2020

  ABSTRACT: With the advent of good designs of nails, straight and angled in the arena of treatment for fractures from surgical neck of humerus to approximately 5 cm above the olecranon fossa, nailing is gaining popularity in recent literature. Many different nails are available in market with different proximal and distal locking configurations. Beach chair and supine are the main principle positions for antegrade humerus nailing. Beach chair or supine is the preferred position by many, but there is always difficulty in distal locking by free hand technique as it is difficult to locate the distal locking hole due to rounded smooth anatomy of anterior distal humerus and fear of neurovascular complications in both anteroposterior and latero-medial locking. The aim of this article is to demonstrate the utility of lateral position in ease of nailing all types of humerus fractures. The technique and illustrations below describe the positioning of patient, image intensifier and free hand postero-anterior distal locking without injury to neurovascular structures.