Article citationsMore>>

Su, Z., Schadler, L.S., Duncan, R., Hillborg, H. and Auletta, T. (2008) Mechanisms Leading to Improved Mechanical Performance in Nanoscale Alumina Filled Epoxy. Composites Science and Technology, 68, 2965-2975.
https://doi.org/10.1016/j.compscitech.2008.01.009

has been cited by the following article:

• TITLE: Mechanical Properties of Epoxy Composite Materials Produced with Different Ceramic Powders

  AUTHORS: Yelda Akçin Ergün

  KEYWORDS: Polymer Composite, Epoxy, Ceramic Powders, Mechanical Properties

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.7 No.12, December 10, 2019

  ABSTRACT: In this study, production and mechanical properties of polymer composite materials obtained by using Al2O3, SiO2, MgO and TiO2 hard ceramic fillers were studied. Epoxy resin was used as the matrix material, and four different ceramic powders were mechanically mixed into the resin at 3% and 5% as reinforcement. The mechanical properties of the polymer composite materials were then characterized. For this purpose, flexural modulus and flexural strength of composite materials were determined by using three point bending test and impact toughness of the materials were determined by Charpy impact test. In addition, the hardness values of the samples were determined by Shore D hardness test.