TITLE:
Power Stripping of Asbestos-Containing Insulation from Electrical Cable
AUTHORS:
Charles L. Blake, Giffe T. Johnson, Raymond D. Harbison
KEYWORDS:
Asbestos, Exposure, Insulating Covers, Power Stripping, Electrical Wire, Chrysotile Asbestos, Asbestos Fibers, Asbestos-Related Disease, Asbestos-Containing Material
JOURNAL NAME:
Occupational Diseases and Environmental Medicine,
Vol.7 No.3,
August
5,
2019
ABSTRACT: Efforts to recycle copper from electrical conductors have led to the development of specialized machines, which automatically remove insulating covers from wires and cable products. In the past, certain wire and cable products were insulated using chrysotile asbestos. This research was undertaken to determine the asbestos fiber exposure risks associated with power stripping machinery to remove asbestos-containing insulation materials from electrical wire or cable. A Rigby Machinery, Inc., Model 4H electric powered wire/cable insulation stripping machine was acquired along with approximately 42 m of asbestos insulated cable. During two separate, but nearly identical, test sessions, a laborer used the wire stripper to remove the asbestos-containing insulation from the subject cable. This work took place within a closed metal building with a total interior volume of 2500 m3. Industrial hygiene personal and area air samples were collected for airborne fibers throughout all wire stripping periods. Collected air samples were analyzed using phase contract microscopy (PCM) and transmission microscopy (TEM). The results of analysis using PCM for personal samples (n = 3) taken during periods of continuous cable stripping activity showed test period airborne fiber exposures ranging from 0.034 to 0.068 (mean 0.056 f/cc). Follow-up analysis of these personal samples using TEM indicated asbestos adjusted PCM exposures ranging from 0.017 to 0.045 (mean 0.033 f/cc). Area air samples taken at distances ranging from 2 to 9 meters from the wire stripper (n = 16) showed asbestos adjusted PCM concentrations ranging from less than 0.0001 to 0.041 f/cc (mean 0.007 f/cc). The process of power stripping asbestos-containing insulation from electrical wires and cables can cause exposure to airborne asbestos fibers. However, the levels of such exposure are not expected to exceed the current occupational exposure limits for asbestos of 0.1 f/cc as an 8-hr TWA or 1.0 f/cc averaged over a 30-minute exposure period.