TITLE:
Resistance of Commercial Bed Covers against Faecal Pellets of House Dust Mites: Behaviour of Seams and Zippers
AUTHORS:
Dirk Höfer, Nadja Berner-Dannenmann, Christoph Marquardt, Timo Hammer
KEYWORDS:
Dust Mite, Allergen, Dermatophagoides pteronyssinus, Allergy, Laundry, Nonwoven, Fabric, Encasing
JOURNAL NAME:
Journal of Textile Science and Technology,
Vol.5 No.2,
May
8,
2019
ABSTRACT: This study evaluated the allergen impermeability against airborne allergens of dust mite droppings through all parts of commercial bed covers, including surface seams and zippers. Specimens were taken from places with and without seams and zipper. A novel penetration cell was developed to expose the specimens to an inoculum of purified mite droppings that was assessed for its allergen content Der p1 prior to the penetration tests. Using covers of different construction and material, the penetration level increased significantly in the presence of seams and zippers and could reach up to 6% depending on the seam’s/zipper’s characteristics and quality. Therefore, zippers and seams have to be considered as access points for the penetration of mite droppings. As for the penetration of airborne mite particles through the zipper, the penetration level was greatly attenuated by the presence of a cover strip. Depending on the respective quality and the construction type, the mite allergen Der p1 penetrated most likely through the zipper and seams of the specimens, already after a single laundry cycle. Hence, laundry may compromise the barrier performance and proves to be an important quality feature. In all samples, the textile surface showed sufficient allergen impermeability. Our conclusions provide recommendations to both manufacturers and users.