Article citationsMore>>

Song, P., Cao, Z., Cai, Y., Zhao, L., Fang, Z. and Fu, S. (2011) Fabrication of Exfoliated Graphene-Based Polypropylene Nanocomposites with Enhanced Mechanical and Thermal Properties. Polymer, 52, 4001-4010.
https://doi.org/10.1016/j.polymer.2011.06.045

has been cited by the following article:

• TITLE: High-Density Polyethylene Based on Exfoliated Graphite Nanoplatelets/Nano-Magnesium Oxide: An Investigation of Thermal Properties and Morphology

  AUTHORS: A. I. Alateyah

  KEYWORDS: High-Density Polyethylene, Exfoliated Graphite Nanoplatelets, Magnesium Oxide Nanoparticles, TGA, XRD, SEM

  JOURNAL NAME: Materials Sciences and Applications, Vol.10 No.3, March 11, 2019

  ABSTRACT: In this study, high-density polyethylene (HDPE)/exfoliated graphite nanoplatelet (xGnP) composites reinforced with a 2 wt.% concentration of nano-magnesia (n-MgO) were fabricated using an injection moulding machine. The thermal properties and morphological structures of the composites were investigated. The XRD results showed the peaks of xGnP and n-MgO, where the intensity of the xGnP peaks became stronger with adding increasing amounts of xGnP into the polymermatrix. In terms of morphology, some agglomeration of particles was observed within the matrix, and the agglomeration decreased the thermal properties of the composites. The nanocomposites showed less thermal stability than the pristine polymer. The reduction in the onset temperature compared to that of neat HDPE was attributed to less adhesion between the fillers and the matrix. In addition, the crystallinity was reduced by the addition of fillers.