Article citationsMore>>

Qiu, W., Yang, D., Xu, J., Hong, B., Jin, H., Jin, D., Peng, X., Li, J., Ge, H. and Wang, X. (2016) Efficient Removal of Cr(VI) by Magnetically Separable CoFe2O4/Activated Carbon Composite. Journal of Alloys and Compounds, 678, 179-184.
https://doi.org/10.1016/j.jallcom.2016.03.304

has been cited by the following article:

• TITLE: Removal of Pertechnetate (99TcO4-) from Liquid Waste by Magnesium Ferrite (MgFe2O4) Nanoparticles Synthesized Using Sol-Gel Auto Combustion Method

  AUTHORS: W. M. Abdellah, A. Ezzat, I. Samir

  KEYWORDS: Magnesium Ferrite, Nanoparticles, Sol-Gel, Auto Combustion, Adsorption, Pertechnetate, Low Level Radioactive Waste

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.9 No.2, February 26, 2019

  ABSTRACT: Low-cost adsorbents, Magnesium ferrite (MgFe2O4) nanoparticles were synthesized using three different types of fuel such as Urea, Oxalic acid, and Citric acid via sol-gel auto-combustion method. The prepared products were characterized by means of powder X-Ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FT-IR) and Field Emission Scanning Electron Microscope (FE-SEM). The influence of the fuel used on the morphology and the crystallite size of MgFe2O4 Nano products were studied. The results showed that Citric acid fuel produced pure MgFe2O4 with the smallest crystallite size average cluster = 13.53 nm. The synthesized sample was used for the removal of 99TcO4- anions from low level liquid waste under studied conditions. The different parameters affecting on the adsorption process using the batch method were studied. The results revealed that MgFe2O4 nanostructure has high removal ability of 99TcO4- from aqueous solutions (98.84%). The adsorption data are in good agreement with Freundlich and Pseudo second order isotherm models. The adsorption process was a chemisorption reaction additionally, the results of the thermodynamic parameters indicated that the adsorption of 99TcO4- on nanostructures was an exothermic and spontaneous process.