Article citationsMore>>

Pereira, F.D.A.S., Freitas M.S., Silva, J.V.L. and Rosário, J.M. (2014) Study and Improvement of a Modeling Head by Molten Filament Deposition by Means of Thermal Analysis of Finite Elements. VIII National Congress of Mechanical Engineering, Uberlandia, 10 August 2014, 1-8.
http://www.swge.inf.br/PDF/CONEM2014-0305_12192.PDF

has been cited by the following article:

• TITLE: Analysis of Thermal Conduction in the Machine Border Collapse: Numerical and Experimental Comparison

  AUTHORS: Giancarlo Ferreira Matos, Diego Alves de Miranda

  KEYWORDS: 3D Heat Transfer, Numerical Simulation, Finite Volumes Method

  JOURNAL NAME: Open Access Library Journal, Vol.6 No.1, January 25, 2019

  ABSTRACT: The success of a design of a machine manufacturing line is directly related to the efficiency in the use of raw material and components, requiring a total control of the process. In this work the numerical simulation was applied to analyze the conduction of heat transferred in the Edge gluing machine Smc1 and to validate the simulations with the temperature differences collected experimentally. These validations were performed with the collection of temperatures via thermal imaging, which provides greater accuracy of thermal conduction capture. The results obtained are similar in relation to certain points captured by thermal imaging. The thermal model analyzed represents proximity to the heat distribution during the use of the machine.