Article citationsMore>>

C. Joao, N. D. Biswa, G. Abhijit and L. Maitreya, “A Direct Method for Model Updating with Incomplete Measured Data and without Spurious Modes,” Mechanical Systems and Signal Processing, Vol. 21, No. 7, 2007, pp. 2715-2731. doi:10.1016/j.ymssp.2007.03.001

has been cited by the following article:

• TITLE: Structural Reanalysis of Dynamic Systems Using Model Updating Method

  AUTHORS: Kyoung-Bong Han

  KEYWORDS: Model Updating, Reanalysis, Frequency Response Functions, Transformation Matrix, Damping Matrix

  JOURNAL NAME: Engineering, Vol.3 No.10, October 21, 2011

  ABSTRACT: Model updating methodologies are invariably successful when used on noise-free simulated data, but tend to be unpredictable when presented with real experimental data that are unavoidably corrupted with uncorrelated noise content. In this paper, reanalysis using frequency response functions for correlating and updating dynamic systems is presented. A transformation matrix is obtained from the relationship between the complex and the normal frequency response functions of a structure. The transformation matrix is employed to calculate the modified damping matrix of the system. The modified mass and stiffness matrices are identified from the normal frequency response functions by using the least squares method. A numerical example is employed to illustrate the applicability of the proposed method. The result indicates that the present method is effective.