Article citationsMore>>

McGee, M., Howie, D., Neale, S., Haynes, D. and Pearcy, M. (1997) The role of polyethylene wear in joint replacement failure. Proceedings of the Institution of Mechanical Engineering, Part H: Journal of Engineering in Medicine, 211(1), 65-72. doi:/10.1243/0954411971534692

has been cited by the following article:

• TITLE: The role of hardness and roughness on the wear of different CoCrMo counterfaces on UHMWPE for artificial joints

  AUTHORS: Victor A. González-Mora, Michael Hoffmann, Rien Stroosnijder, F. Javier Gil

  KEYWORDS: Wear; Artificial Joints; CoCrMo; Hardness; Roughness

  JOURNAL NAME: Journal of Biomedical Science and Engineering, Vol.4 No.10, October 17, 2011

  ABSTRACT: Wear tests were carried out to study the effect of the hardness and roughness with various counterface materials on UHMWPE wear behaviour. The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Additionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) device for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.