Article citationsMore>>

Stergaršek, A., Horvat, M., Kotnik, J., Tratnik, J., Frkal, P., Kocman, D., Jacimovic, R., Fajon, V., Ponikvar, M., Hrastel, I., Lenart, J., Debeljak, B. and Cujez, M. (2008) The Role of Flue Gas Desulphurisation in Mercury Speciation and Distribution in a Lignite Burning Power Plant. Fuel, 87, 3504-3512.
https://doi.org/10.1016/j.fuel.2008.06.003

has been cited by the following article:

• TITLE: Distribution and Accumulation of Major and Trace Elements in Gypsum Samples from Lignite Combustion Power Plant

  AUTHORS: Majda Pavlin, Radojko Jaćimović, Andrej Stergaršek, Peter Frkal, Maja Koblar, Milena Horvat

  KEYWORDS: Trace and Major Elements, Wet Flue Gas Desulphurization Gypsum, Particle Size Fractions, Mercury and Selenium, Sample Preparation

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.9 No.12, December 18, 2018

  ABSTRACT: Flue gas containing volatile elements, fine fly ash particulates not retained by particle control devices, and limestone are the most important sources of trace and major elements (TMEs) in wet flue gas desulphurization (WFGD) gypsum. In this study, samples of gypsum slurry were separated into fine and coarse fractions. Multi-elemental analysis of 45 elements in the different size fractions of gypsum, slurry waters and lignite were performed by k0-INAA (k0-instrumental neutron activation analyses). The study found that the volatile elements (Hg, Se and halogens) in the flue gas accumulate in the fine fractions of gypsum. Moreover, the concentrations of most TMEs are considerably higher in the fine fractions compared to the coarse fractions. The exceptions are Ca and Sr that primarily originate from the limestone. Variations of TMEs in the finer fractions are dependent on the presence of CaSO4·2H2O that is the main constituent of the coarse fraction. Consequently, the content of TMEs in the fine fraction is highly dependent on the efficiency of separating the fine fraction from the coarse fraction. Separation of the finer fraction, representing about 10% of the total gypsum, offers the possibility to remove effectively TMEs from WFGD slurry.