Article citationsMore>>

J. E. Elshof, C. R. Abadal, J. Sekulic, S. R. Chrowdhury and D. H. A. Blank, “Transport Mechanisms of Water and Organic Solvents through Microporous Silica in the Pervaporation of Binary Liquids,” Microporous Mesoporous Materials, Vol. 65, No. 2-3, 2003, pp. 197-208. doi:10.1016/j.micromeso.2003.08.010

has been cited by the following article:

• TITLE: Separation Performance of Sodium Alginate/Poly Vinyl Pyrrolidone Membranes for Aqueous/Dimethylformamide Mixtures by Vapor Permeation and Vapor Permeation with Temperature Difference Methods

  AUTHORS: Ebru Kondolot Solak, Oya Şanlı

  KEYWORDS: Vapor Permeation, Sodium Alginate, Dimethylformamide, Membrane, Poly (Vinyl Pyrrolidone)

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.1 No.4, October 26, 2011

  ABSTRACT: In this study sodium alginate (NaAlg)/poly (vinyl pyrrolidone) (PVP) blend membranes were prepared and crosslinked with CaCl2 (0.1 Molarity (M)) for the separation of aqueous/dimethylformamide (DMF) mixtures. Membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and their performance was examined by varying experimental parameters such as feed composition (0 - 100 wt%), operating temperature (30℃ - 50℃) and membrane thickness (30 - 90 micrometer (μm)). Blending NaAlg with PVP, decreased separation factor whereas increased the permeation rate as the permeation temperature was increased in Vapor Permeation (VP) and Vapor Permeation with Temperature Difference (TDVP) methods. In the TDVP method, the separation factors increased and the permeation rates decreased as the temperature of the membrane surrounding is decreased. The highest separation factor of 60 was obtained in TDVP method for 90 wt% DMF concentration in the feed.