TITLE:
Development and Testing of a Variable Rate Nitrogen Application System through an Overhead Irrigation System
AUTHORS:
Phillip B. Williams, Ahmad Khalilian, Michael W. Marshall, Joe Mari Maja, Haibo Liu, Dara Park, Ali Mirzakhani Nafchi
KEYWORDS:
Cotton, Nitrogen, Fertigation, Irrigation, Variable Rate, Nutrient Management, Precision Agriculture
JOURNAL NAME:
Journal of Water Resource and Protection,
Vol.10 No.10,
October
29,
2018
ABSTRACT: Nutrients are injected through overhead irrigation systems at a uniform rate in a process known as fertigation. The highly variable soils in the Southeastern US pose challenges for effective fertigation. Currently, there is no variable-rate fertigation system available to apply the correct amount of N within a field through an overhead irrigation system. Therefore, the objective of this study was to develop and test a variable-rate N application system that works independently of irrigation water flow for site-specific N application. The variable-rate fertigation system (VRFS) was designed to apply different rates N using a pulse width modulation technique. The VRFS utilized the Clemson Lateral Irrigation Control software which controlled the solenoids in each zone by turning the N supply on and off (pulsing) for each zone. In this study, four tests were conducted to determine the uniformity of the VRFS. In test # 1, the pump output showed a linear slope relationship and was the same for water and N. In test # 2, nozzle flow and uniformity were determined using four different irrigation system travel speeds at N application rates of 31, 59, 88, and 113 kg/ha. There was a strong correlation (R2 = 0.9998) between irrigation system speed and N rate. In test # 3, the uniformity across the length of the irrigation system was determined. The nozzles produced an average flow of 31.1, 58.7, 87.6, and 112.7 kg N/ha with an overall average error of 0.1% across all N rates. Results also showed the system was capable of accurately applying N based on prescription maps with an error of less than 1.8%. Test # 4 was conducted to determine the accuracy of the map-based controller system for applying variable rate N. There was a strong correlation between target N and actual N rates (R2 = 0.9999). In summary, the VRFS applied the correct amounts of N within each zone by either manually controlling the pulsing mechanism or utilizing a prescription map to apply different rates throughout the field.