Article citationsMore>>

Ghannadpour, S.A., Najafi, A. and Mohammadi, B. (2006) On the Buckling Behavior of Cross-Ply Laminated Composite Plates Due to Circular/Elliptical Cutouts. Composite Structures, 75, 3-6.
https://doi.org/10.1016/j.compstruct.2006.04.071

has been cited by the following article:

• TITLE: Analysis on the Effects of Cut-Outs in Hollow Inconel 718 Gas Turbine Shafts

  AUTHORS: Kaushik V. Prasad, Karthik Nagendra, Hiriyannaiah Adarsha, Abhijeeth Nagaraj, Venkatachar Ravinarayan, Venkatesh Sandeep, Madihalli Kenchappa Ranganatha Swamy

  KEYWORDS: Static Analysis, Crack Propagation, Non Linear Analysis, Stress Concentration, Square Cutouts

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.8 No.7, July 30, 2018

  ABSTRACT: Gasturbines are provided with cut-outs for minimizing vibrations. Round cut-outs are usually favored but there are various designs which offer more advantages over the circular shape. The objective of this work was to compare stress reduction during the induced vibration in the hollow gas turbine shafts by introducing different cut-outs. Round, square and elliptical cut-outs under different orientations were compared. It is observed that a square cutout at 45°orientation has the least stress concentration. This is due to the effective orientation of plastic strains along the principal axis.