Article citationsMore>>

G. Tolentino, M. Toledo and V. Zurita, “Experimental Study of Boundary Layer on a NACA 65-010 Blade Using Some Flow Visualization Techniques. Flow Visualization and Imagine Processing of Multiphase System,” Proceeding of the 1995 ASME/JSME Fluids Engineering Division Conference, South Carolina, 13-18 August 1995.

has been cited by the following article:

• TITLE: Wind Tunnel at LABINTHAP (Updated)

  AUTHORS: P. Rosas Quiterio, M. Toledo Velázquez, G. Tolentino Eslava, R. Tolentino Eslava, J. Abugaber Francis

  KEYWORDS: Wind Tunnel, Calibration, Measurement, Boundary layer, Hot Wire Anemometer

  JOURNAL NAME: Energy and Power Engineering, Vol.3 No.4, September 27, 2011

  ABSTRACT: Flow behavior in the Thermal Engineering and Applied Hydraulics Laboratory (LABINTHAP) wind tunnel was investigated by measuring the velocity profiles, turbulence intensity and wall effects with a hot wire anemometer. Measurements were carried out under wind speeds 5, 15 and 30 m/s in planes located at 1.8, 2.6 and 3.4 m from flow inlet to the test section. The flow showed a good quality with a velocity variation less than 1%, turbulence intensity lower than 4% and the wall effects allow having an excellent work area in the test section for the velocities evaluated.