Article citationsMore>>

S. S. P. Parkin, K. P. Roche, M. G. Samant, P. M. Rice, R. B. Beyers, R. E. Scheueriein, E. J. O’Sullivan, S. L. Brown, J. Bucchigano, D. W. Abraham, Y. Lu, M. Rooks, P. L. Trouilloud, R. A. Warner and W. J. Gallagher, “Exchange-Biased Magnetic Tunnel Junctions and Ap-plication to Nonvolatile Magnetic Random Access Mem-ory,” Journal of Applied Physics, Vol. 85, No. 8, 1999, pp. 5828-5833. doi:10.1063/1.369932

has been cited by the following article:

• TITLE: Acoustic Wave Propagation in Nanocrystalline RuCo Alloys

  AUTHORS: Pramod Kumar Yadawa, Devraj Singh, Dharmendra Kumar Pandey, Giridhar Mishra, RajaRam Yadav

  KEYWORDS: Alloys, Elastic Properties, Ultrasonic Properties

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.1 No.2, September 30, 2011

  ABSTRACT: The ultrasonic properties like elastic constant, ultrasonic velocity in the hexagonal structured nanocrystalline RuCo alloys have been studied along unique axis at room temperature. The second and third order elastic constants (SOEC & TOEC) have been calculated for these alloys using Lennard-Jones potential. The orientation dependent ultrasonic velocity has been also evaluated to study the anisotropic behaviour of these alloys. The velocities VL and VS1 have minima and maxima, respectively at 45° with unique axis of the crystal, while VS2 increases with the angle from unique axis. The inconsistent behaviour of angle-dependent velocities is associated to the action of second order elastic constants. Debye average ultrasonic velocities of these alloys are increasing with the angle and has maximum at 55° with unique axis at room temperature. Hence, when a ultrasonic wave travels at 55° with unique axis of these alloys, then the average ultrasonic velocity is found to be maximum. Elastic constants and density are mainly the affecting factor for anomalous behaviour of ultrasonic velocity in these alloys. The mechanical and ultrasonic properties of Co0.75Ru0.25 alloy will be better than the other compounds due to their high SOEC, ultrasonic velocity and low ultrasonic attenuation. Co0.75Ru0.25 alloy is more suitable for industrial and other uses, as it has the highest elastic constants and lowest ultrasonic attenuation in comparison to other of these alloys. The results of this investigation are discussed in correlation with other known thermophysical properties.