Article citationsMore>>

Takeichi, T., Ujiie, K. and Inoue, K. (2005) High Performance Poly(urethane-imide) Prepared by Introducing Imide Blocks into the Polyurethane Backbone. Polymer, 46, 11225-11231.
https://doi.org/10.1016/j.polymer.2005.09.075

has been cited by the following article:

• TITLE: Thermoplasticity in Polyurethane-Imide Elastomers

  AUTHORS: Tomohiro Ueda, Shin-Ichi Inoue

  KEYWORDS: Polyurethane-Imide Elastomer, Polyol, Acid Anhydride, Morphology, Chemical and Physical Properties

  JOURNAL NAME: Open Journal of Polymer Chemistry, Vol.8 No.1, February 26, 2018

  ABSTRACT: Polyurethane-imide elastomers (PUIEs) are formed from isocyanates, polyols, diamines, and acid anhydrides through liquid polymerization. However, thermoplastic PUIEs have rarely been reported because the synthesis of thermoplastic PUIEs remains a challenge in polymer chemistry. In this study, PUIEs were prepared from 4,4'-diphenylmethane diisocyanate, polyols (polytetramethylene glycol (Mw = 1000), polycaprolactone diol (Mw = 1000), and polycarbonate diol (Mw = 1000)), 4,4'-oxydianiline, and acid anhydrides (pyromellitic dianhydride and 4,4'-oxydiphtaric anhydride). The thermoplasticities of the resultant PUIEs were investigated, and only PUIEs synthesized using 4,4'-oxydiphtaric anhydride expressed thermoplasticity.