Article citationsMore>>

Ikeda, T., Aoki, K. and Nakajima, H. (2005) Fabrication of Lotus-Type Porous Stainless Steel by Continuous Zone Melting Technique and Mechanical Property. Metallurgical and Materials Transactions A, 36, 77-86.
https://doi.org/10.1007/s11661-005-0140-1

has been cited by the following article:

• TITLE: Mechanical, Thermal and Electrical Properties of Lotus-Type Porous Metals

  AUTHORS: Hideo Nakajima

  KEYWORDS: Lotus Metals, Porous Metals, Mechanical Properties, Thermal Conductivity, Electrical Conductivity, Solidification, Porosity, Hydrogen

  JOURNAL NAME: Materials Sciences and Applications, Vol.9 No.2, February 7, 2018

  ABSTRACT: Lotus-type porous metals are fabricated by directional solidification of molten metals dissolving hydrogen. Unidirectional pores cause various anisotropic features of mechanical, thermal and electrical properties. Tensile, compressive and fatigue strength parallel to the pore direction are higher than those perpendicular to the pore direction. Besides, thermal and electrical conductivities parallel to the pore direction are higher than those perpendicular to the pore direction. Such anisotropy is attributed to the difference in the pinning cross-sectional area due to the dislocations and the scattering cross-sectional area due to electrons. The pore cross-sectional area perpendicular to the pore direction is much larger than that parallel to the pore direction. It is surmised that such difference in pore cross-section results in the anisotropy in mechanical, thermal and electrical properties.