Article citationsMore>>

Ma, Z., Tong, G., Chen, F., Wang, Q. and Wang, S. (2015) Grain Size Effect on Springback Behavior in Bending of Ti-2.5 Al-1.5 Mn Foils. Journal of Materials Processing Technology, 224, 11-17.
https://doi.org/10.1016/j.jmatprotec.2015.04.025

has been cited by the following article:

• TITLE: Springback of I-Section Beam after Pure Bending with von Mises Criteria

  AUTHORS: Reham Saleh, Gamal Ali, Abla El-Megharbel

  KEYWORDS: Bending Sections, Beam, Springback, von Mises

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.6 No.1, February 2, 2018

  ABSTRACT: The objective of the present paper is to introduce a theoretical analysis of bending I-sections after pure bending. The springback values are determined to provide a quantitative method for predicting the springback using von Mises criteria. The analytical methods for the I-section are given for two cases according to the positions of the yield point along the height of the beam. The controlling parameters on the springback of I-sections are studied. The results obtained are quite successful for the prediction of springback for bending I-sections.