Article citationsMore>>

Al-Qureshi, H. and Russo, A. (2002) Spring-Back and Residual Stresses in Bending of Thin-Walled Aluminium Tubes. Materials & Design, 23, 217-222.
https://doi.org/10.1016/S0261-3069(01)00061-9

has been cited by the following article:

• TITLE: Springback of I-Section Beam after Pure Bending with von Mises Criteria

  AUTHORS: Reham Saleh, Gamal Ali, Abla El-Megharbel

  KEYWORDS: Bending Sections, Beam, Springback, von Mises

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.6 No.1, February 2, 2018

  ABSTRACT: The objective of the present paper is to introduce a theoretical analysis of bending I-sections after pure bending. The springback values are determined to provide a quantitative method for predicting the springback using von Mises criteria. The analytical methods for the I-section are given for two cases according to the positions of the yield point along the height of the beam. The controlling parameters on the springback of I-sections are studied. The results obtained are quite successful for the prediction of springback for bending I-sections.